Accessories

Sungrow SBR battery system parts kit, includes the switchgear, cover and base required to commission a Sungrow SBR battery stack. Supplied separate...

Tesla Backup Gateway 2.1 Split-core Solar CT, 100 A. Used on the solar circuit to monitor PV generation when the Gateway can't directly read the in...

Fronius Smart Meter 63A-1, single-phase direct-connect meter for residential Fronius inverter systems. Mounted in the main switchboard for accurate...

Tesla Powerwall 3 DC-coupled battery label kit with solar grid site plan template, designed for systems running 3 MPPTs. Provides the on-site label...

The Sungrow S100 single-phase smart energy meter provides accurate consumption and export monitoring for single-phase Sungrow residential systems. ...

The Tigo TS4-A-O Advanced Retrofit Base Plate adds module-level optimisation and monitoring to existing solar panels via 1.2 m leads. Suitable for ...

Sungrow SBH battery system parts kit, includes the switchgear, cover and base required to commission a Sungrow SBH battery stack. Supplied separate...

DC-coupled battery label kit (ASE1057) for general installations, providing the on-site stickers required for DC-coupled solar plus battery systems...

0.5 m expansion harness for chaining additional Tesla Powerwall 3 expansion units. Use when expansion units are mounted directly adjacent to the pa...

The Tesla Powerwall 3 Expansion Wall Mount Kit is a genuine Tesla mounting accessory designed to enable secure, compliant wall-mounted installation...

Fronius Smart Meter 63A-3, three-phase direct-connect meter for residential and small commercial Fronius inverter systems. Mounted in the main swit...

Tonglin DC solar cable, 4 mm² 1500 V dual-core, supplied as a 100 m roll. Tested to AS/NZS 5033:2021. Suits residential and small commercial invert...

The Sungrow DTSU666 single and three-phase smart energy meter is the standard meter shipped with most Sungrow hybrid inverter systems. Provides rea...

Sungrow DTSU666-20 single and three-phase smart energy meter, supplied as a pack of three units (suits a three-phase commercial install with three ...

Grid Connect label kit with site plan template, for general use. Provides the required on-site labelling per AS/NZS 4777.1:2016 for grid-connected ...

Tesla Backup Gateway 2.1 solar CT extension cable, 3 m length. Allows the supplied solar CT to reach further from the Gateway when the AC supply pa...

Enphase Q Cable, single-phase portrait orientation, with a 1.3 m connector pitch. Designed for portrait-mounted modules in single-phase Enphase mic...

The Tesla Powerwall 3 Expansion Stacking Kit is a factory-approved mounting solution designed to securely stack multiple Powerwall 3 units in a ver...

Stainless steel cable clip for 2 x 4 mm DC solar cable, sold in packs of 100. Used to secure DC strings to mounting rails or roof structure. Marine...

ASE Technology earthing cable, 4 mm², supplied as a 100 m roll. Tinned copper conductor with green / yellow PVC sheath, suits earthing of solar arr...

Enphase Q Cable, three-phase portrait orientation, with a 1.3 m connector pitch. Designed for portrait-mounted modules in three-phase Enphase micro...

The Sungrow DTSD1352-C three-phase smart energy meter (1(6)A) is designed for commercial and light-industrial three-phase installations. CTs sold s...

The Sungrow EyeM4 is a 4G communications dongle with a five-year SIM card subscription included. Plug it into a Sungrow inverter's communications p...

Fronius Smart Meter WR 100-600V-3, three-phase wide-range CT-operated meter for larger commercial Fronius inverter systems. Suits commercial supply...

The Enphase IQ Gateway / Envoy-S Metered (ENV-S-WM-230) is the standard communications and monitoring hub for Enphase IQ7 and IQ8 microinverter sys...

Fastron SCT-F24-300-5A current transformer, 300:5 A ratio. Compatible with the Sungrow DTSD1352 three-phase commercial smart meter for installation...

MC4-compatible solar connector pair (one male, one female) suitable for cable outside diameter 3.0 to 6.0 mm. Includes brass metal pins. Used for j...

Fronius Smart Meter 50kA-3, three-phase CT-operated meter for larger commercial Fronius inverter systems where direct connection is impractical. CT...

The Tesla Powerwall 3 Expansion Harness is a factory-engineered accessory designed to enable seamless parallel installation of multiple Powerwall 3...

Genuine Sungrow Branch Connector JONHON pair, rated 75 A. Used to combine two Sungrow SBH or SBR battery stacks into a single connection to the inv...

The Accessory TESLA Grid Utility Ancillary Controller (GUAC) for DRM0, including one wiring harness (2163703-00-x), is a critical component for man...

Enphase Q Cable single-phase terminator cap, sold as a bag of 10. Used to terminate the end of a single-phase Enphase Q Cable run. Order code: Q-TE...

Replacement Tesla Backup Gateway 2.1 glass door, suitable for indoor or sheltered outdoor installations. OEM Tesla part.Order code: 1451507-00-E.

Tonglin DC solar cable, 6 mm² 1500 V dual-core, supplied as a 100 m roll. Tested to AS/NZS 5033:2021. Suits residential and small commercial invert...

Enphase Q Cable three-phase terminator cap, sold as a bag of 10. Used to terminate the end of a three-phase Enphase Q Cable run. Order code: Q-TERM...

The Accessory TESLA Powerwall 3 Front Cover GLASS Assembly (1763418-01-X) is a precision-engineered replacement part designed to maintain the struc...

Tesla Powerwall installation dolly. Used to safely move and position Powerwall units during installation.Order code: 1856187-xx-y.

Spare 200 A current transformer for the Tesla Powerwall 3 Remote Energy Meter. Used as a replacement or for a second supply phase.Order code: 20333...

Tesla Powerwall 3 Remote Energy Meter Kit, includes one 200 A CT. Required when the Powerwall 3 system is installed away from the main switchboard ...

BYD CBH-40A premium battery combiner box for HVS / HVM Battery-Box Premium installations, rated 40 A. Provides the DC switchgear and combining requ...

Enphase Q Cable, single-phase landscape orientation, with a 2.0 m connector pitch. Designed for landscape-mounted modules in single-phase Enphase m...

AC cable coupler for joining lengths of Enphase 1-phase or 3-phase Q-cable. Used when a single Q-cable run is too short for the panel layout. Order...

The Tigo Cloud Connect Advanced is the central monitoring controller for Tigo TS4 optimised systems, providing real-time panel-level performance da...

The Enphase Q Relay 3P INT is the three-phase interface device required for Enphase IQ7 and IQ8 microinverter installations. Provides AS/NZS 4777.2...

The Enphase Q Relay 1P INT is the single-phase interface device required for Enphase IQ7 and IQ8 microinverter installations. Provides AS/NZS 4777....

The Goodwe GM330 three-phase smart meter (CTs sold separately) provides accurate real-time generation, consumption, and export data on three-phase ...

The Tesla Powerwall 3 Expansion Harness is a factory-engineered accessory designed to enable seamless parallel installation of multiple Powerwall 3...

MC4-EVO2 connector pair (one male, one female) for cable outside diameter 4.7 to 6.4 mm. Rated 1500 V. Includes brass crimp pins. Suits Stäubli MC4...

Replacement outdoor enclosure tub for the Tesla Backup Gateway 2.1. Provides IP-rated weather protection for outdoor Gateway installations. OEM Tes...

Enphase Q Cable female sealing cap, sold as a bag of 10. Seals the open end of an Enphase Q Cable run for moisture protection. Order code: Q-SEAL-10.

CHINT NB1-63 32 A single-pole 6 kA AC miniature circuit breaker. C-curve characteristic, suitable for inverter AC supply protection in residential ...

Enphase Q Cable rail mount cable management clip, sold as a bag of 100. Used to secure Enphase Q Cable runs to the mounting rail along the back of ...

Enphase Q Cable, three-phase landscape orientation, with a 2.0 m connector pitch. Designed for landscape-mounted modules in three-phase Enphase mic...

Tonglin DC solar cable, 10 mm² 1500 V dual-core, supplied as a 50 m roll. Tested to AS/NZS 5033:2021. Suits commercial inverter inputs requiring hi...

AC 2-hole cable gland, 25 mm, suitable for terminating 1 or 3-phase Enphase Q-cable into a switchboard or junction box. Provides IP-rated entry. Or...

Roof Deck Tite (Dektite Solar) flashing, designed to seal cable entries through tile or tin roofing. Suits a range of roof types and is sized for t...

The Sungrow Logger1000A is a multi-protocol communications gateway supporting 4G, RS485, Ethernet, and Wi-Fi. Used in commercial Sungrow installati...

Fronius CT A Clamp 100:5A, current transformer for use with the Fronius Smart Meter 50kA-3. Suits sub-100 A single-phase loads or commercial three-...

Enphase Q Cable connector disconnection tool, sold as a bag of 10. Tradesperson tool for disengaging Q Cable connectors during service or relocatio...

The Goodwe GMK110 single-phase smart meter is supplied with a 120 A current transformer (CT). It enables real-time consumption monitoring and accur...

The Tigo Access Point (TAP) is the wireless gateway that collects panel-level performance data from Tigo TS4 optimisers and reports it to the Tigo ...

The Reserva Dual Mounting Kit supplies a matched pair of brackets designed to secure two Reserva battery towers in a front-mounted arrangement. Eac...

Fronius CT A Clamp 400:5 A current transformer, for use with the Fronius Smart Meter 50kA-3. Suits commercial three-phase loads up to 400 A per phase.

Fronius CT A Clamp 200:5 A current transformer, for use with the Fronius Smart Meter 50kA-3. Suits commercial three-phase loads up to 200 A per phase.

This FOX ESS DC terminal protective cover is the manufacturer's spare part for H3-Pro 15, 20, 25, and 29.9 kW three-phase commercial hybrid inverte...

The FOX ESS Wireless Gateway is an AP and STA pair that allows installations to bridge the FOX ESS DTSU666 meter to the cloud over Wi-Fi, removing ...

This FOX ESS three-phase CT set provides three 400 A primary / 40 mA secondary current transformers with 10 m leads. Designed to pair with the FOX ...

Fronius Smart Meter IP communicates over RS-485, Wi-Fi and LAN, supporting flexible installation when direct meter wiring isn't possible. Compatibl...

Enphase IQ Battery 5P installation handle kit, supplied with the lifting handles required to safely position IQ Battery 5P units during installatio...

NewSun PV inline fuse, 1500 VDC 25 A, with DC 4 mm² cable. Used inline on solar strings to provide overcurrent protection per AS/NZS 5033. Specific...

The Sungrow WiNet-S is the standard Wi-Fi and Ethernet dongle for Sungrow G3 residential inverters. Plug-and-play install into the inverter communi...

CHINT NB1-63 50 A single-pole 6 kA AC miniature circuit breaker. C-curve characteristic, suitable for inverter AC supply protection in larger resid...

The Reserva Extension Kit is designed to expand an existing Dual Mounting Kit configuration, enabling installers to join on extra Reserva battery t...

RS-485 communications harness for the Tesla Powerwall 3 Remote Energy Meter. Connects the remote meter back to the Powerwall 3 chassis.Order code: ...

Fronius Backup Controller 3P-35A is a three-phase backup automatic transfer switch rated 35 A, designed for use with Fronius GEN24 Plus and Symo GE...

The Sungrow SJR050-04 is the residential battery combiner box for the SBH battery range, supporting 5 kWh module configurations. Provides a clean D...

The TMAC GSD (Generation Signalling Device) is a QLD-only compliance device required by Energex and Ergon for generation systems above the network'...

iBoard Single-phase triple Q-relay enclosure / outdoor board, designed for Enphase microinverter installations using three Q-Relay 1P controllers. ...

Fronius Datamanager 2.0 (WLAN / LAN) is the legacy data logger and inverter communications module for Fronius Galvo, Symo, Primo and Eco inverters....

Enphase Q Cable single-phase male connector, sold as a bag of 10. Used to add inline drops or extensions to single-phase Enphase Q Cable runs. Orde...

Enphase Q Cable single-phase female connector, sold as a bag of 10. Used to add inline drops or extensions to single-phase Enphase Q Cable runs. Or...

Rigid danger label warning of the risk of battery explosion at battery energy storage installations. Suitable for use on enclosures, battery cabine...

Rigid danger label warning of toxic fumes hazards at battery energy storage installations. Suitable for use on enclosures, fire-rated walls, and ba...

The FOX ESS DTSU666 three-phase smart meter (CT-changeable variant) is designed for commercial installations where current transformers are sized t...

Genuine MC4-EVO2 branch connector pair, 1500 V 60 A, IEC compliant. Used to combine two strings into one input on inverters such as the Sungrow SBR...

3.5 m extension cable for the Tesla Powerwall 3 Remote Energy Meter CTs. Use when the CT location is further from the meter than the supplied lead ...

Enphase Communications Kit 2 INT, includes a 400 mm USB cable and adaptor for connecting an Enphase IQ Gateway / Envoy to the local network during ...

Sungrow trolley accessory for the iDC30E 30 kW DC fast charger. Wheeled mobile cart with brakes, allowing the charger to be relocated between bays ...

Sungrow standing pole accessory for the iDC30E 30 kW DC fast charger. Floor-mounted galvanised steel pole used when wall mounting is impractical (o...

Power up your electric vehicle with the Sungrow 30kW DC Charger. Designed for efficiency and convenience, this high-performance charger features: ...

Fronius DRM Interface for Queensland-only installations. Required by Energex and Ergon to enable demand response signalling on QLD-network-connecte...

Enphase split-core CT, 200 A, suitable for the Envoy-S Metered (ENV-S-WM-230). Provides accurate real-time generation and consumption monitoring on...