Accessories

Sungrow SBR battery system parts kit, includes the switchgear, cover and base required to commission a Sungrow SBR battery stack. Supplied separate...

Tesla Backup Gateway 2.1 Split-core Solar CT, 100 A. Used on the solar circuit to monitor PV generation when the Gateway can't directly read the in...

Provides the on-site labelling required per AS/NZS 4777.1 / 5139 for DC-coupled solar plus battery installations. Key specifications MPPT count:...

Fronius Smart Meter 63A-1, single-phase direct-connect meter for residential Fronius inverter systems. Mounted in the main switchboard for accurate...

The Sungrow S100 single-phase smart energy meter provides accurate consumption and export monitoring for single-phase Sungrow residential systems. ...

Sungrow SBH battery system parts kit, includes the switchgear, cover and base required to commission a Sungrow SBH battery stack. Supplied separate...

The Tigo TS4-A-O Advanced Retrofit Base Plate adds module-level optimisation and monitoring to existing solar panels via 1.2 m leads. Provides per-...

DC-coupled battery label kit (ASE1057) for general installations, providing the on-site stickers required for DC-coupled solar plus battery systems...

0.5 m expansion harness for chaining additional Tesla Powerwall 3 expansion units. Use when expansion units are mounted directly adjacent to the pa...

The Tesla Powerwall 3 Expansion Wall Mount Kit is a genuine Tesla mounting accessory designed to enable secure, compliant wall-mounted installation...

Fronius Smart Meter 63A-3, three-phase direct-connect meter for residential and small commercial Fronius inverter systems. Mounted in the main swit...

Tonglin DC solar cable, 4 mm² 1500 V dual-core, supplied as a 100 m roll. Tested to AS/NZS 5033:2021. Key specifications System voltage: 1500V ...

The Sungrow DTSU666 single and three-phase smart energy meter is the standard meter shipped with most Sungrow hybrid inverter systems. Provides rea...

Compatible with Sungrow hybrid inverters only. Key specifications Meter: DTSU666 Suits Sungrow DTSU666-20 single and three-phase smart energy m...

Grid Connect label kit with site plan template, for general use. Provides the required on-site labelling per AS/NZS 4777.1:2016 for grid-connected ...

Tesla Backup Gateway 2.1 solar CT extension cable, 3 m length. Allows the supplied solar CT to reach further from the Gateway when the AC supply pa...

Enphase Q Cable, single-phase portrait orientation, with a 1.3 m connector pitch. Order code: Q-25-10-240. Suits Designed for portrait-mounted modu...

The Tesla Powerwall 3 Expansion Stacking Kit is a factory-approved mounting solution designed to securely stack multiple Powerwall 3 units in a ver...

Stainless steel cable clip for 2 x 4 mm DC solar cable, sold in packs of 100. Used to secure DC strings to mounting rails or roof structure. Marine...

ASE Technology earthing cable, 4 mm², supplied as a 100 m roll. Suits Tinned copper conductor with green / yellow PVC sheath, suits earthing of sol...

Enphase Q Cable, three-phase portrait orientation, with a 1.3 m connector pitch. Order code: Q-25-10-3P-200. Suits Designed for portrait-mounted mo...

Compatible with Sungrow commercial inverters and Logger1000A. Suits The Sungrow DTSD1352-C three-phase smart energy meter (1(6)A) is designed for c...

The Sungrow EyeM4 is a 4G communications dongle with a five-year SIM card subscription included. Plug it into a Sungrow inverter's communications p...

Fronius Smart Meter WR 100-600V-3, three-phase wide-range CT-operated meter for larger commercial Fronius inverter systems. Suits Suits commercial ...

The Enphase IQ Gateway / Envoy-S Metered (ENV-S-WM-230) is the standard communications and monitoring hub for Enphase IQ7 and IQ8 microinverter sys...

Fastron SCT-F24-300-5A current transformer, 300:5 A ratio. Compatible with the Sungrow DTSD1352 three-phase commercial smart meter for installation...

Fronius Smart Meter 50kA-3, three-phase CT-operated meter for larger commercial Fronius inverter systems where direct connection is impractical. Su...

The Tesla Powerwall 3 Expansion Harness is a factory-engineered accessory designed to enable seamless parallel installation of multiple Powerwall 3...

Suits Companion accessory in the solar / battery installation ecosystem.

Genuine Sungrow Branch Connector JONHON pair, rated 75 A. Used to combine two Sungrow SBH or SBR battery stacks into a single connection to the inv...

The Accessory TESLA Grid Utility Ancillary Controller (GUAC) for DRM0, including one wiring harness (2163703-00-x), is a critical component for man...

Enphase Q Cable single-phase terminator cap, sold as a bag of 10. Used to terminate the end of a single-phase Enphase Q Cable run. Order code: Q-TE...

OEM Tesla part. Order code: 1451507-00-E. Suits Replacement Tesla Backup Gateway 2.1 glass door, suitable for indoor or sheltered outdoor installat...

Tonglin DC solar cable, 6 mm² 1500 V dual-core, supplied as a 100 m roll. Tested to AS/NZS 5033:2021. Key specifications System voltage: 1500V ...

Enphase Q Cable three-phase terminator cap, sold as a bag of 10. Used to terminate the end of a three-phase Enphase Q Cable run. Order code: Q-TERM...

Tesla Powerwall 3 Remote Energy Meter Kit, includes one 200 A CT. Required when the Powerwall 3 system is installed away from the main switchboard ...

The Accessory TESLA Powerwall 3 Front Cover GLASS Assembly (1763418-01-X) is a precision-engineered replacement part designed to maintain the struc...

Tesla Powerwall installation dolly. Used to safely move and position Powerwall units during installation. Order code: 1856187-xx-y. Suits Companion...

Spare 200 A current transformer for the Tesla Powerwall 3 Remote Energy Meter. Used as a replacement or for a second supply phase. Order code: 2033...

BYD CBH-40A premium battery combiner box for HVS / HVM Battery-Box Premium installations, rated 40 A. Provides the DC switchgear and combining requ...

Enphase Q Cable, single-phase landscape orientation, with a 2.0 m connector pitch. Order code: Q-25-17-240. Suits Designed for landscape-mounted mo...

AC cable coupler for joining lengths of Enphase 1-phase or 3-phase Q-cable. Used when a single Q-cable run is too short for the panel layout. Order...

The Tigo Cloud Connect Advanced is the central monitoring controller for Tigo TS4 optimised systems, providing real-time panel-level performance da...

Replacement outdoor enclosure tub for the Tesla Backup Gateway 2.1. Provides IP-rated weather protection for outdoor Gateway installations. OEM Tes...

The Enphase Q Relay 3P INT is the three-phase interface device required for Enphase IQ7 and IQ8 microinverter installations. Provides AS/NZS 4777.2...

The Enphase Q Relay 1P INT is the single-phase interface device required for Enphase IQ7 and IQ8 microinverter installations. Provides AS/NZS 4777....

The Goodwe GM330 three-phase smart meter (CTs sold separately) provides accurate real-time generation, consumption, and export data on three-phase ...

The Goodwe GMK110 single-phase smart meter is supplied with a 120 A current transformer (CT). It enables real-time consumption monitoring and accur...

The Tesla Powerwall 3 Expansion Harness is a factory-engineered accessory designed to enable seamless parallel installation of multiple Powerwall 3...

MC4-EVO2 connector pair (one male, one female) for cable outside diameter 4.7 to 6.4 mm. Rated 1500 V. Includes brass crimp pins. Order code: PV-KX...

Enphase Q Cable female sealing cap, sold as a bag of 10. Seals the open end of an Enphase Q Cable run for moisture protection. Order code: Q-SEAL-1...

CHINT NB1-63 32 A single-pole 6 kA AC miniature circuit breaker. Key specifications Current rating: 32A Suits C-curve characteristic, suitable ...

Enphase Q Cable rail mount cable management clip, sold as a bag of 100. Used to secure Enphase Q Cable runs to the mounting rail along the back of ...

Enphase Q Cable, three-phase landscape orientation, with a 2.0 m connector pitch. Order code: Q-25-17-3P-200. Suits Designed for landscape-mounted ...

Tonglin DC solar cable, 10 mm² 1500 V dual-core, supplied as a 50 m roll. Tested to AS/NZS 5033:2021. Key specifications System voltage: 1500V ...

Provides IP-rated entry. Order code: ACSW-2HG-UNI. Suits AC 2-hole cable gland, 25 mm, suitable for terminating 1 or 3-phase Enphase Q-cable into a...

Suits Companion accessory in the solar / battery installation ecosystem.

Roof Deck Tite (Dektite Solar) flashing, designed to seal cable entries through tile or tin roofing. EPDM rubber boot for long-term weather seal. S...

The Sungrow Logger1000A is a multi-protocol communications gateway supporting 4G, RS485, Ethernet, and Wi-Fi. Used in commercial Sungrow installati...

Fronius CT A Clamp 100:5A, current transformer for use with the Fronius Smart Meter 50kA-3. Suits Suits sub-100 A single-phase loads or commercial ...

Enphase Q Cable connector disconnection tool, sold as a bag of 10. Tradesperson tool for disengaging Q Cable connectors during service or relocatio...

This FOX ESS DC terminal protective cover is the manufacturer's spare part for H3-Pro 15, 20, 25, and 29.9 kW three-phase commercial hybrid inverte...

CHINT NB1-63 50 A single-pole 6 kA AC miniature circuit breaker. Key specifications Current rating: 50A Suits C-curve characteristic, suitable ...

The Tigo Access Point (TAP) is the wireless gateway that collects panel-level performance data from Tigo TS4 optimisers and reports it to the Tigo ...

The FOX ESS Wireless Gateway is an AP and STA pair that allows installations to bridge the FOX ESS DTSU666 meter to the cloud over Wi-Fi, removing ...

The Reserva Dual Mounting Kit supplies a matched pair of brackets designed to secure two Reserva battery towers in a front-mounted arrangement. Eac...

RS-485 communications harness for the Tesla Powerwall 3 Remote Energy Meter. Connects the remote meter back to the Powerwall 3 chassis. Order code:...

Fronius CT A Clamp 400:5 A current transformer, for use with the Fronius Smart Meter 50kA-3. Suits Suits commercial three-phase loads up to 400 A p...

Suits Companion accessory in the solar / battery installation ecosystem.

Fronius CT A Clamp 200:5 A current transformer, for use with the Fronius Smart Meter 50kA-3. Suits Suits commercial three-phase loads up to 200 A p...

This FOX ESS three-phase CT set provides three 400 A primary / 40 mA secondary current transformers with 10 m leads. Designed to pair with the FOX ...

Compatible with FOX ESS commercial three-phase inverters for accurate generation, consumption, and export monitoring. Model: DTSU666 (CT changeable...

Fronius Smart Meter IP communicates over RS-485, Wi-Fi and LAN, supporting flexible installation when direct meter wiring isn't possible. Compatibl...

Enphase IQ Battery 5P installation handle kit, supplied with the lifting handles required to safely position IQ Battery 5P units during installatio...

NewSun PV inline fuse, 1500 VDC 25 A, with DC 4 mm² cable. Used inline on solar strings to provide overcurrent protection per AS/NZS 5033. Specific...

The Sungrow WiNet-S is the standard Wi-Fi and Ethernet dongle for Sungrow G3 residential inverters. Plug-and-play install into the inverter communi...

Fronius Datamanager 2.0 (WLAN / LAN) is the legacy data logger and inverter communications module for Fronius Galvo, Symo, Primo and Eco inverters....

Rigid danger label warning of toxic fumes hazards at battery energy storage installations. Suits Suitable for use on enclosures, fire-rated walls, ...

The Reserva Extension Kit is designed to expand an existing Dual Mounting Kit configuration, enabling installers to join on extra Reserva battery t...

Provides whole-home backup operation when paired with a compatible battery. Order code: 4/240/047/CK. Key specifications Current rating: 35A Su...

The Sungrow SJR050-04 is the residential battery combiner box for the SBH battery range, supporting 5 kWh module configurations. Provides a clean D...

The TMAC GSD (Generation Signalling Device) is a QLD-only compliance device required by Energex and Ergon for generation systems above the network'...

Provides a single weatherproof enclosure for outdoor mounting. Suits iBoard Single-phase triple Q-relay enclosure / outdoor board, designed for Enp...

Suits Companion accessory in the solar / battery installation ecosystem.

Suits Companion accessory in the solar / battery installation ecosystem.

Enphase Q Cable single-phase male connector, sold as a bag of 10. Used to add inline drops or extensions to single-phase Enphase Q Cable runs. Orde...

Enphase Q Cable single-phase female connector, sold as a bag of 10. Used to add inline drops or extensions to single-phase Enphase Q Cable runs. Or...

Rigid danger label warning of the risk of battery explosion at battery energy storage installations. Suits Suitable for use on enclosures, battery ...

Genuine MC4-EVO2 branch connector pair, 1500 V 60 A, IEC compliant. Used to combine two strings into one input on inverters such as the Sungrow SBR...

3.5 m extension cable for the Tesla Powerwall 3 Remote Energy Meter CTs. Use when the CT location is further from the meter than the supplied lead ...

Enphase Communications Kit 2 INT, includes a 400 mm USB cable and adaptor for connecting an Enphase IQ Gateway / Envoy to the local network during ...

Sungrow trolley accessory for the iDC30E 30 kW DC fast charger. Wheeled mobile cart with brakes, allowing the charger to be relocated between bays ...

Sungrow standing pole accessory for the iDC30E 30 kW DC fast charger. Floor-mounted galvanised steel pole used when wall mounting is impractical (o...

Power up your electric vehicle with the Sungrow 30kW DC Charger. • Fast Charging: Delivers 30kW of power to get you back on the road quickly. • Dur...

Fronius DRM Interface for Queensland-only installations. Required by Energex and Ergon to enable demand response signalling on QLD-network-connecte...

Key specifications Connector: EVO2 Suits Companion accessory in the solar / battery installation ecosystem.

Provides accurate real-time generation and consumption monitoring on each phase. Order code: CT-200-SPLIT-INT. Key specifications Current rating...